Security Alarms AR6000 Guide de l'utilisateur télécharger pdf (Page 87)

87SPEKTRUM DX6 • DX6 HELICOPTER PROGRAMMING GUIDE

PROGRAMMING A RUDDER DUAL RATE

Programmable mixing is a powerful feature that offers many creative options. As an example a dual rate rudder

can be easily added and turned on/ off via a selected switch. By mixing rudder to rudder, (4-4) selecting the

desired switch to turn on/off the mix and by assigning positive values to increase the rudder travel, or negative

values to reduce the travel, a rudder dual rate is added that offers independent throw values in each direction.

Following are the steps to add a rudder dual rate:















�







PROGRAMMING A RUDDER DUAL RATE

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons simultaneously to enter function mode.

3. Press the SCROLL button until mix A11 appears at the top right corner of the screen.

4. Press the INCREASE button until 4 (rudder) appears on the screen as the master channel.

5. Press the DECREASE button until 4 (rudder) appears on the screen as the slave channel.

6. Move the rudder stick in the desired direction and press the INCREASE or DECREASE button to set the

desired rudder dual rate travel.

Note: A positive value will increase the rudder travel, while a negative value will decrease

the rudder travel.

7. Move the rudder stick in the opposite direction to adjust that direction’s value.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 95 96

Pas de commentaire

Security Alarms AR6000 Guide de l'utilisateur Page 87